sB3040 - IDU with 4 x E1/T1 Intefaces


Features at a Glance
-
Supports Point to point and point to multipoint applications.
- Stable E1/T1 clock recovery, low jitter and wander
-
Low processing delay for E1/T1 channels, high bandwidth usage efficiency
-
Resistance to packet loss, with PCM frame synchronization protection
-
Large jitter buffer to resist packet delay variation (PDV)
-
QoS for E1/T1 by limiting Ethernet port throughput.
-
Local and remote E1/T1 LOS and AIS and packet loss indication for trouble-shooting and maintenance
-
Upto Four E1/T1 Ports supported. Cascadable for more than 4 E1/T1 lines
-
Built-in 2 Uplink ports. 1+1 backup supported
-
User defined encapsulation packet size for different applications
- Web GUI for easy setup and maintenance.
The IDU with E1/T1 Interface provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and save on the maintenance cost.
Technical Specifications
| INTERFACES | |
|
Uplink |
1+1 Uplink (IEEE 802.3 Compliance) |
|
E1/T1 Ports |
4 E1/T1 with (G.703 compliance) Impedance: E1: 100Ohm, T1: 100/75 Ohm |
|
Data Ports |
2 User Data port (IEEE 802.3 Compliance) 10/100 and Half/Full duplex auto sensing |
| MANAGEMENT | |
|
Device Management |
Device management via WEB GUI |
| POWER | |
|
Power Supply |
-48VDC/220V AC Duel Power Supply |
|
Consumption |
< 10W |
| WORKING ENVIRONMENT | |
|
Temperature |
0~ 50°C |
|
Relative Humidity |
< 90% ( Non-Condensing) |
| DIMENSION | |
|
W x H x D (mm) |
440 x 44 x 230 |

